4G+ROUTER1200 - User Guide 4
/
84
Copyright © STRONG 2024. All Rights Reserved. 4
/
84
I. Introduction
1. General Introduction
The following user manual is meant to guide you in the installation process of your 4G+ ROUTER
1200. For this purpose, we will detail the process to set up your device and network. In addition, we
will present you the process to connect to Web UI and the different parameters that you can set, as
well as the meaning of the LEDs that you can see on your device.
2. Presentation of the Device and its LEDs
Congratulations, you bought one of our 4G routers, now it is the time to present the device before
configuring it for its first use.
The 4G+ ROUTER 1200 works with a full-size SIM card that must be inserted in the SIM card slot with
an adapter, depending on the size of the SIM card provided by your service provider. This
manipulation must be done before switching on the device. Moreover, for your network to work you
might need to unlock the SIM card by entering its pin code in the Web UI, for more information
please see, inserting your SIM card
and
entering your PIN code in the Web UI.
Our router is equipped with two external antennas that you have to install in the dedicated slots on
the rear side of the device.
On the front side of the device, you can see a few LEDs that give you information about the status of
the network, Wi-Fi, WPS, etc.
To Next Page
Loading...
