Strong 4G+ROUTER1200 - IP Filter; Basic Settings; WAN to LAN

4G+ROUTER1200 - User Guide 58 / 84
Copyright © STRONG 2024. All Rights Reserved. 58 / 84
5. IP Filter
This section enables you to configure IP Filters for you WAN and LAN connection.
5.1. Basic Settings
1. Click Security and IP Filter
.
2. Click the Enable WAN to LAN side IP Filtering toggle button and select the mode . Then, click
the Enable IP Filtering from LAN to WAN toggle button and select the mode .
5.2. WAN to LAN
1. Click Security and IP Filter . Then click, WAN to LAN .