4G+ROUTER1200 - User Guide
49
/
84
Copyright © STRONG 2024. All Rights Reserved.
49
/
84
5. WPS
You can change the WPS connection method or disable the WPS.
5.1. Activating the WPS
There are two connection methods for your WPS:
Push Button mode: If you select the first option, your devices will connect to the WPS
after pressing the WPS button for two seconds. To activate the WPS please follow this
procedure
.
PIN: If you select the PIN option, a PIN code will be generated on the device that you
want to connect and you will have to enter it in the Web UI before clicking
Submit
.
Please note that the WPS PIN code is not related in any way to the SIM Card PIN code. The
WPS PIN code is a different PIN code that is only used to connect devices of your home to the
Wi-Fi network of the 4G Router 300V2.
Once, you connected your devices by using one of the WPS methods mentioned above, they will
automatically connect to the network.
To Next Page
Loading...
