Stryker 3002 - Mattress Specifications; Environmental Conditions

8 3006 -109-101 REV A www.stryker.com
Return To Table of Contents
Introduction
Wireless Radio (iBed
®
Wireless Option) 802.11 b/g, 2.4 GHz
• Minimum Operational Signal Strength: -65 dB
• Supported Securities:
WEP
WPA-PSK (TKIP)
WPA2-PSK (CCMP/AES)
• Supports IPv4 and DHCPv4
Outlet Option 115VAC, 60Hz, 10A
Battery Voltage (1) 9V - Nurse Call Option (Alkaline Battery)
Noise Level > 65dB
MATTRESS SPECIFICATIONS
Thickness 6” 15.2 cm
Width >= 35” >= 88.9 cm
Length >= 84” >= 213.4 cm
ILD 80 lbs 36.3 kg
The above stated mattress specifications assist in ensuring the product conforms to HBSW and IEC specifications.
ENVIRONMENTAL CONDITIONS
Environmental Conditions Operation Storage and Transportation
Ambient Temperature
50
0
F
104
0
F
(10
0
C)
(40
0
C)
-22
0
F
140
0
F
(-30
0
C)
(60
0
C)
Relative Humidity
(Non-Condensing)
30%
75%
10%
95%
Atmospheric Pressure
700 hPa
1060 hPa
500 hPa
1060 hPa
Stryker reserves the right to change specifications without notice.
Specifications listed are approximate and may vary slightly from unit to unit or by power supply fluctuations.