What to do if temperature is higher than normal in Stryker Medical Equipment?
If the temperature of your Stryker Medical Equipment is higher than normal, allow the unit to cool before restarting it.
What to do if a hardware fault is detected in Stryker Medical Equipment?
If a hardware fault is detected in your Stryker Medical Equipment, turn the power off and on again. If the problem persists, contact a Stryker representative or return the console for repair.
What to do if a software fault is detected in Stryker Crossfire 2?
If a software fault is detected in your Stryker Medical Equipment, turn the power off and on again. If the problem persists, contact a Stryker representative or return the console for repair.
How to fix a power-on self test error on Stryker Crossfire 2?
If a power-on self test error has occurred with your Stryker Medical Equipment, turn the power off and on again. If the problem persists, contact a Stryker representative or return the console for repair.
What to do if RF probe is not ready in Stryker Crossfire 2?
If the RF probe is not ready on your Stryker Medical Equipment, check the connection to the console.
How to fix expired RF probe in Stryker Crossfire 2 Medical Equipment?
If the RF probe is expired on your Stryker Medical Equipment, replace the probe.
What to do if RF probe identification is invalid in Stryker Crossfire 2 Medical Equipment?
If the RF probe identification is invalid on your Stryker Medical Equipment, replace the probe.
What to do if Stryker Medical Equipment system does not power on?
If your Stryker Medical Equipment system isn't powering on, check that the power cord is properly connected. Also, verify that the cord is connected to a grounded outlet.
What to do if RF voltage is too high in Stryker Medical Equipment?
If the RF voltage is too high on your Stryker Medical Equipment, check the probe for damage. If necessary, replace the probe.
What to do if the AC voltage is incorrect in Stryker Crossfire 2 Medical Equipment?
If the AC voltage is incorrect for your Stryker Medical Equipment, turn the power off and on again. If the problem persists, contact a Stryker representative or return the console for repair.
General| Brand | Stryker |
|---|---|
| Model | Crossfire 2 |
| Category | Medical Equipment |
| Language | English |
Specific warnings regarding fire and explosion hazards associated with the device's operation.
Description and identification of the console's front panel controls and indicators.
Specific orthopedic and arthroscopic procedures for which the system is indicated.
Conditions where the Crosseal system should not be used.
Troubleshooting common problems related to the Crossfire 2 console.
Troubleshooting issues related to disposable attachments.
Troubleshooting common footswitch connection or functionality problems.
To Next Page
