FU(H4SO)-37
FUEL INJECTION (FUEL SYSTEMS)
Air Assist Injector Solenoid Valve
13.Air Assist Injector Solenoid
Valve
A: REMOVAL
NOTE:
Air assist injector solenoid valve is equipped in 1.6
L model only.
1) Disconnect the ground cable from battery.
2) Disconnect the connector (A) from the air assist
injector solenoid valve, and then disconnect the air
by-pass hoses (B).
3) Remove the air assist injector solenoid valve
from intake manifold.
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
For tightening torque, refer to “COMPONENT”.
<Ref. to FU(H4SO)-3, COMPONENT, General De-
scription.>
FU-00009
FU-00964
(A)
(B)
(B)
FU-00965
To Next Page
Loading...
