FU(H4SO)-16
FUEL INJECTION (FUEL SYSTEMS)
Intake Manifold
3. Intake Manifold
A: REMOVAL
1) Release the fuel pressure. <Ref. to FU(H4SO)-
50, RELEASING OF FUEL PRESSURE, OPERA-
TION, Fuel.>
2) Open the fuel flap lid, and then remove the fuel
filler cap.
3) Disconnect the ground cable from battery.
4) Remove the air intake duct and air cleaner case.
<Ref. to IN(H4SO)-6, REMOVAL, Air Intake Duct.>
and <Ref. to IN(H4SO)-5, REMOVAL, Air Cleaner
Case.>
5) Disconnect the accelerator cable (A).
6) Disconnect the cruise control cable (B). (With
cruise control model)
7) Remove the power steering pump and reservoir
tank from bracket.
(1) Remove the resonator chamber. <Ref. to
IN(H4SO)-7, REMOVAL, Resonator Chamber.>
(2) Remove the front side V-belt. <Ref. to
ME(H4SO)-43, REMOVAL, V-belt.>
(3) Remove the bolts which hold the power
steering pipes onto intake manifold protector.
NOTE:
Do not disconnect the power steering hose.
(4) Remove the bolts which install the power
steering pump bracket.
(5) Disconnect the connector from the power
steering pump switch.
(6) Remove the power steering tank from the
bracket by pulling it upwards.
FU-00009
FU-00251
(B)
(A)
FU-00877
FU-00139
FU-00878
FU-00020
To Next Page
Loading...
