Part 1: User Level WSPC USER INTERFACE
7
SECTION 2 GETTING STARTED
2.1 ACCESS PRIVILEGES
The WSPC User Interface program may be accessed at two levels.
User Level: Allows users to access the program without entering a password.
The user should be an individual with specific authorization to use the WSPC
software and knowledge of the compressor operation. This level includes all
data and adjustments for normal applications of the compressor. At this level a
user has access to the following displays: Compressor Data, Machine Info,
Service, Maintenance, Sequencing, and Adjustments.
Administrator Level: This provides additional functions for maintenance,
service, and setup for trained compressor technicians. Administrator level
functions are described in Part 2 of this manual. A password is required to
access this level.
2.2 STARTING THE SOFTWARE
1. Click the shortcut located on the computer desktop to start the WSPC
User Interface program.
2. When the program opens, a dialog box will appear as shown in Figure
2.1a. Click OK to open the WSPC program.
If the program was last closed while operating at the Administrator level
the dialog box will require a password as shown in Figure 2.1b.
Figure 2.1a WSPC User Interface password request
To Next Page
Loading...