Part 1: User Level WSPC USER INTERFACE
39
SECTION 4 SETTING USER PREFERENCES
4.1 USER PROFILES
User Profiles are used to configure the WSPC software for a specific user or
group of users. Settings made in a profile only change the appearance and
action of the software program and do not affect the operation of the WS
Controller or compressor. The User Profiles option allows the operator to view
profile settings, modify a profile, create a new profile, save current settings as a
new profile, and switch profiles.
4.1.1 User Profile Option
To view the preferences of the current running profile:
1. Click “File” in the menu bar (Figure 4.1).
Figure 4.1 Profiles Menu Selection
2. Select “Profiles”. The User Profiles window will open displaying settings for
the current profile. See Figure 4.2.
3. To see the settings of a different profile, click the name of a profile to be
viewed from the list in the lower half of the window. The settings for the
selected profile will be presented in the fields in the upper section of the
window.
4. The “User Name” displays the name of the active profile. The name can be
an individual name, group name, machine, etc.
5. The “Notes” field displays information relating to the profile entered when the
profile was created.
6. The “Language” field displays the current language setting for the WSPC
displays.
7. “Units” settings display the units of measure displayed by the WSPC
software. Setting of the units here will not affect the units displayed on the
WS Controller interface. The following unit settings are available.
Pressure – Displays pressures in units of PSI, Bar, or kPa.
Temperature – Displays temperatures in units of Deg F or Deg C.
Flow – Displays air flow in units of ACFM, M
3
/hr, M
3
/min, L/min, and L/sec.
To Next Page
Loading...