Part 1: User Level WSPC USER INTERFACE
33
To change the WS Controller Display preferences:
1. Change the UI Pressure unit of measure by clicking the drop-down arrow
and selecting the desired unit: PSI, Bar, or kPA. See Figure 3.15.
2. Change the UI Temperature unit of measure by clicking the drop-down
arrow and selecting the desired unit: Deg F or Deg C.
3. Change the Language preference by clicking the drop-down arrow and
selecting the desired language: English, French, Spanish, German, or
Italian.
Figure 3.15 Units and Language Preferences
3.8.5 Time and Date Adjustments
Synchronize Time and Date with PC Clock
The date and time of the WS Controller internal clock can be synchronized with
the PC clock at the “Adjustments” display.
To synchronize the clocks, click on the “Synch with PC clock” button. See Figure
3.16.
The program will automatically adjust the controller clock and
calendar to the same time as the computer clock.
Manual Time/Date Adjustment
The WS Controller date and time can be manually adjusted when synchronizing
the controller with the PC is not desired. Follow the steps below to manually
adjust the time and date settings.
NOTE
Changes to the WS Controller user interface preferences do not affect
the display of units and language in the WSPC software. WSPC
preferences are set as User Profiles.
To Next Page
Loading...