Sullair WSPC - Loading Parameter Settings

Part 1: User Level WSPC USER INTERFACE
37
b. Filter a column by clicking on the expansion arrow in the space
above the column containing the filter criteria. The arrow will
present a list of the contents of the column. Select the item in the
list by which the column is to be filtered. Click the “Clear Filter” to
show all profiles.
c. Delete a Machine Profile by clicking on the profile name and then
clicking “Delete.” A confirmation dialog box will appear. Click “Yes”
to confirm deletion or “No” to cancel.
Figure 3.19 Machine Profiles Window
3.8.10 Loading Parameter Settings
At the “Machine Profiles” window, control parameters from a saved profile can be
loaded to the WS Controller. The values stored in the saved profile will replace
the parameter values displayed on the Adjustments display. When an
adjustment register is loaded, the new parameter values become immediately
effective at the WS Controller.
To load a saved Machine Profile:
1. Access the “Adjustments” display by clicking on the “Adjustments” tab.
2. Click the Load/Save button on the “Adjustments” display (Figure 3.18).