WSPC USER INTERFACE Part 1: User Level
34
Figure 3.16 Time and Date Adjustment
To adjust the time setting:
1. Double-click in the hour field to select the hour value.
2. Type the hour of the day in 24 hour format.
3. Double-click in the minutes field and type the current minutes on the hour.
4. Double-click in the seconds field and type the current seconds.
5. Press Enter. The new set time will be assigned to all logs and data
generated by the WS Controller.
To adjust the Date setting:
1. Click the arrow at the edge of the month field. The Month popup list will
appear.
2. Select the current month.
3. Double-click in the Day field and enter the current day of the month.
4. Double-click on the Year field and enter the current year using four digits.
5. Press Enter on the PC keyboard. The new date setting will be assigned to
all logs and data generated by the WS Controller.
3.8.6 Communication Parameters
Communication Parameters control the transmission of data to and from the WS
Controller via an RS-485 serial interface. These settings allow the controller to
be configured to communicate with a device having RS-485 capabilities. The
RS-485 configurable parameters are listed below. See Figure 3.17.
TIME FIELD
Hour:Minutes:Seconds
Click to Synchronize
with PC Clock
To Next Page
Loading...