Part 1: User Level WSPC USER INTERFACE
25
3.6 DISTRIBUTOR INFORMATION
Distributor Information can be accessed by clicking on the “Distributor Info”
button on the “Compressor Data” display. A window will appear, similar to Figure
3.10, presenting previously entered information. Enter additional information
here as desired in the lower pane.
Figure 3.10 Distributor Information
3.7 SEQUENCE SYSTEM DISPLAY
The status of compressors connected in sequence can be viewed at the
Sequence System Display. See Figure 3.11. The top line of the Sequence
System Display shows the total system pressure. The sequence information
contained in the table can display compressor data for up to sixteen machines in
a sequence. The compressors are listed down the left side of the sequence
information table in order of com number. Refer to the Adjustments Display
screen to verify the com number and sequencing mode of the current machine.
To Next Page
Loading...