WSPC USER INTERFACE Part 1: User Level
18
3.3 MACHINE INFO DISPLAY
The “Machine Info” display presents information relating to the current
compressor/controller model and configuration. See Figure 3.3. This information
is view only and cannot be changed by the operator.
Figure 3.3 Machine Info Display
The information presented in the “Machine Info” display is described below.
Controller Software Info
Version Date – Displays the date version of the WS Controller internal software.
I/O Version Pn – Displays the WS Controller I/O unit part number.
U/I Version Pn – Displays the WS Controller User Interface part number.
Compressor Info
This information about the compressor package is recorded during the WS
Controller’s commissioning
Model – The model number
HP – Motor Horsepower
Pressure – Nominal pressure rating
Hz – Line frequency (50 or 60 Hz)
To Next Page
Loading...