WSPC USER INTERFACE Part 1: User Level
12
2.6 THE WSPC DISPLAY SCREEN
The WSPC display screen consists of the title bar, the pull-down menu bar, the
compressor status bar, display tabs, machine operation data display, and the
communication status bar. Refer to Figure 2.6. The default screen is the
Compressor Data display which appears each time the WSPC software is
opened. Listed below are main elements of the screen display that enable the
user to access and view the machine operation data, and modify the machine
control parameters.
Title Bar – Contains the name, part number and version of the WSPC
software program.
File Menu – Drop-down Menu that allows the user to select configuration
options. Available options are Profiles (to create and edit profiles), Login (to
select User login profile), and Exit. The “Commission” selection is available
only with Administrator level access.
Connection Button – When activated, establishes connection between the
PC Interface and the WS Controller unit.
Compressor Status Bar – Located on the left margin of every display, the
Compressor Status Bar provides real-time data of the machine’s current
operation and condition. The Compressor Status Bar is described in detail in
Section 2.7.
Display Tabs – Allow for the selection of the desired display. Section 3
provides a detailed description of each display screen.
Machine Operation Data – Area where the machine parameter data and
operational information is displayed.
Communication Status Indicator – Located at the bottom of the display
window, this line provides communication status information.
User Profile Name – The name of the current user profile is displayed. In
Figure 2.6, the active profile is named “Default User”.
Logging Indicator – This field will light when the PC is recording data.
2.7 COMPRESSOR STATUS BAR
The Compressor Status Bar, which is located left of the main window, displays
real-time data regarding the status of the compressor. The status bar is
constantly displayed whenever the WSPC software is connected to the controller.
This feature allows the user to quickly view the status of the compressor
operation regardless of which display screen is active. Information presented in
the status bar includes the compressor operating mode, operating state,
compressor temperature, sump pressure, and discharge pressure. See Figure
2.6.
The Compressor Status Bar can be displayed as a stand alone compressor
operation monitor as shown in Figure 2.7. The full display window can be hidden
To Next Page
Loading...