Sullair WSPC - Administrator Level Functions; Accessing the Administrator Level

Part 2: Administrator Level WSPC USER INTERFACE
57
SECTION 6 ADMINISTRATOR LEVEL FUNCTIONS
6.1 ADMINISTRATOR LEVEL FUNCTIONS
Persons with Administrator privileges can perform all user level functions plus
additional administrator options that allow greater control and more detailed
adjustments of the machine parameters. These allow setups for special
applications and advanced servicing by trained technicians.
This section applies specifically to Administrator level operations. User level
functions are described in the preceding sections of this manual and are not
repeated here except where necessary in describing a specific administrator
function. Therefore, persons using the program at the administrator level must
be knowledgeable in all user level functions as well. It is assumed that these
persons have read all previous sections of this manual before proceeding.
6.2 ACCESSING THE ADMINISTRATOR LEVEL
Administrator access requires a “key” file to be installed to the admin user’s PC.
The WSPC installation includes the special key file along with the WSPC files.
This key file requires periodic updates. The key is not required for normal User-
level operation of WSPC.
Administrator privileges are assigned when a profile is created. Accessing an
Administrator Profile requires a specific password.
To open the program with Administrator level access:
1. Click on the shortcut located on the computer desktop. The WSPC
program will open to the Password Entry Box. See Figure 6.1.
2. Click the drop-down arrow on User Name and select “Default Admin” or
another desired Administrator profile. When an Administrator level profile
is selected, a field for password entry will be present.
3. Type the access password and click “OK” (or press Enter). .
a. If the correct password was entered, the program will open with
Administrator level access.
b. If no password is entered or if the password entered was incorrect,
an alert will appear indicating either “No password entered” or
“Password incorrect”. Click “OK”, enter the correct password and
press “Enter”.
c. If the key is missing or expired, an alert will appear. Contact Sullair
for update. WSPC may still be used at User level.
NOTE
This section is not required for normal machine operation.