WSPC USER INTERFACE Part 1: User Level
36
Name Server – computer server that implements a name service protocol used
to correlate the server name with the IP address.
Gateway – The access address allowing data to pass to and from the network.
3.8.8 Saving Parameter Settings
The settings for the current control parameters displayed on the Adjustments
display can be saved to a file which can be accessed and loaded to the WS
Controller at a later date.
To save the current parameter settings:
1. Access the “Adjustments” display by clicking on the “Adjustments” tab.
2. Click the Load/Save button on the “Adjustments” display. See Figure
3.18.
Figure 3.18 Load/Save Button
3. The “Machine Profiles” window will appear.
4. Click “Read from Controller” to load the current parameter settings from
the controller to the WSPC.
5. The program will read the settings from the controller, and will generate a
new profile. The new name will appear on the list as a “New Profile”
3.8.9 Editing and Searching Machine Profiles
The descriptions may be edited to make searching easier. This is helpful if
many profiles are saved on your PC.
1. Click on a profile to select it.
2. Click the “Edit” button.
3. Click in the Category 1 or Category 2 descriptions at the top of the page,
and edit as desired. See Figure 3.19.
4. Click the “Save Edits” button.
To sort and/or filter the Machine Profile name list:
a. Sort a column by clicking in the top space above of a column by
which values are to be sorted. One click will sort the column in
ascending order. A second click will sort the column in descending
order. Click the “Clear Sort” button to clear all sorting.
To Next Page
Loading...