WSPC USER INTERFACE Part 1: User Level
44
4. Make changes to the preferences in the profile window as necessary.
Section 4.1.2 details the steps to entering profile preferences.
5. When the profile information has been completed, click “Saved Copied
Profile” to save the profile.
6. Click the “close window button” in the upper right corner of the window to exit
the User Profiles window.
The edited profile will not become the active profile until it has been activated
selecting the desired profile at the “Enter Password” box. Refer to Section
4.1.4.
4.1.4 Activate a profile
A profile can be made active using the “Profiles” option. To activate a profile:
1. Click “File” on the menu bar.
2. Select “Login”.
3. The “Enter Password” box will be presented. See Figure 4.5. At the User
Name field, click the down arrow to display a list of available profiles.
4. Click on the desired profile from the list provided. If an Administrator profile is
selected, a password will be required for access.
5. Click “OK” to activate the selected profile. Clicking “Cancel” will close the
WSPC program.
Figure 4.5 Switch Profile (Password Box)
NOTE
A new profile cannot be given the same name of an already
existing profile.
To Next Page
Loading...