Part 2: Administrator Level WSPC USER INTERFACE
61
“Warning History” button – When selected, presents a table displaying a
history of the 16 most recent warning occurrences.
“Maintenance History” button – When selected, presents a table displaying a
history of the 16 most recent service reminders.
“Reset” buttons – Resets warning messages and service reminders. Click a
“Reset” button next to a warning or service reminder to delete the message from
the list and clear it from the WS Controller display.
“Reset All” button – Clears all warning messages and resets all service
reminders. Click “Reset All” at the bottom of the list of warnings or service
reminders to clear all the messages in the respective list.
Service Interval fields – Allows intervals for “Hours To Next” recommended
service to be set. The intervals are entered into fields of the “Hours To Next” box
in the right-hand column. When a service interval is changed, the change does
not become affective until the “Reset All” button under Recommended Service
is clicked (Refer to Figure 6.7). When a service interval has expired, the related
service reminder message will appear in a field of the Recommended Service
box. A service interval set to zero (0) will disable the service reminder for that
item.
Figure 6.7 Maintenance Display – Admin Level
“Reset All” must be clicked to allow service
interval change to become effective.
To Next Page
Loading...