SummaCut Series Cutters User’ s Manual
General Information 1-3
1.1.2. SUMMACUT SERIES USER’ S MANUAL
The User’ s Manual provides the following information :
• Full technical specifications for the SummaCut Series cutters and the media
to be cut.
• A complete description of the SummaCut Series main components.
• Step-by-step instructions for knife and pen installation, and media loading.
• Instructions for online and local mode ( ) operations.
• Information on the control panel and the cutter’ s parameters.
• Maintenance and cleaning instructions.
• Information about the RS-232-C interface cables used to inter-connect the
cutter and IBM, IBM-compatible, Macintosh and Macintosh-compatible
host computers.
To Next Page
Loading...