SummaCut Series Cutters User’ s Manual
General Information 1-8
IMPORTANT HINT
The use of dimensionally stable media is an essential pre-requisite to
obtaining high cut quality. Additionally, media expansion or
contraction may occur as a result of temperature variations.
To improve the dimensional stability of media, let it stabilise to the
current environmental conditions before usage for a minimum period
of 24 hours.
1.2.9. ELECTRICAL
Main Supply : 48-62 Hz, single phase.
Nominal line Min./Max. line Fuse
D520/D620/D760
Fuse
D1020/D1220
100 V AC 89 - 108 V AC 1.0 A, Slo-Blo 1.25 A, Slo-Blo
120 V AC 108 - 130 V AC 1.0 A, Slo-Blo 1.25 A, Slo-Blo
220 V AC 197 - 238 V AC 0.5 A, Slo-Blo 0.6 A, Slo-Blo
240 V AC 216 - 260 V AC 0.5 A, Slo-Blo 0.6 A, Slo-Blo
TABLE 1-8:
SUMMACUT SERIES ELECTRICAL SPECIFICATIONS
To Next Page
Loading...