FCC NOTICE
The SummaCut series cutters have been tested and found to comply with
the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
These cutters generate, use, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of these
cutters in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own
expense.
Caution !
Changes or modifications, not expressly approved by Summa, who is
responsible for FCC compliance, could void the users authority to operate
this equipment.
DOC NOTICE
The SummaCut-series cutters do not exceed the Class A limits for radio noise
for digital apparatus set out in the Radio Interference Regulations of the
Canadian Department of Communications.
To Next Page
Loading...