EasyManuals Logo

Sun Microsystems StorEdge 3000 Series User Manual

Sun Microsystems StorEdge 3000 Series
328 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #147 background imageLoading...
Page #147 background image
Chapter 6 First-Time Configuration 6-41
8. Choose Yes to confirm the host LUN mapping.
The partition is now mapped to a LUN.
9. Repeat Step 4 through Step 8 to map additional partitions to host LUNs on this
channel and logical drive.
10. Press Escape.
11. If you are LUN mapping a redundant configuration, repeat Step 2 through Step 8
to map partitions to host LUNs with other host ID on the logical drive assigned to
the primary controller.
Note If you are using host-based multipathing software, map each partition to two
or more host IDs so multiple paths will be available from the partition to the host.
12. Repeat Step 2 through Step 11 if you want to map hosts to the
13. From the Main Menu, choose “system Functions Reset controller,” and choose
Yes to confirm.
The controller is reset and the new configuration settings are implemented.

Table of Contents

Other manuals for Sun Microsystems StorEdge 3000 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sun Microsystems StorEdge 3000 Series and is the answer not in the manual?

Sun Microsystems StorEdge 3000 Series Specifications

General IconGeneral
BrandSun Microsystems
ModelStorEdge 3000 Series
CategoryStorage
LanguageEnglish

Related product manuals