4 Mechanical Mounting User Manual
* In case the distance is less than 800 mm, move the inverter from the mounting-bracket or
wall before maintaining fans.
In case of multiple inverters, reserve specific clearance between the inverters. For other instal
lation scenarios, please refer to the relevant technical documents on http://support.sungrow
power.com/.
In case of back-to-back installation, reserve specific clearance between the two inverters.
Install the inverter at an appropriate height for ease of viewing LED indicator and operating
switch(es).
4.3 Installation Tools
Installation tools include but are not limited to the following recommended ones. If necessary,
use other auxiliary tools on site.
22
To Next Page
Loading...
