4 Mechanical Mounting User Manual
Crimping tool
4–6mm
2
Connector wrench Multimeter
≥ 1100 Vdc
RJ45 crimping tool
Vacuum cleaner
4.4 Moving the Inverter
Before installation, remove the inverter from the packing case and move it to the installation
site. Follow the instructions below as you move the inverter:
• Always be aware of the weight of the inverter.
• Lift the inverter using the handles positioned on both sides of the inverter.
• Move the inverter by one or two people or by using a proper transport tool.
• Do not release the equipment unless it has been firmly secured.
CAUTION
Improper handling may cause personal injury!
• Arrange an appropriate number of personnel to carry the inverter according to
its weight, and installation personnel should wear protective equipment such as
anti-impact shoes and gloves.
• Attention must be paid to the center of gravity of the inverter to avoid tilting during
handling.
• Placing the inverter directly on a hard ground may cause damage to its metal
enclosure. Protective materials such as sponge pad or foam cushion should be
placed underneath the inverter.
• Move the inverter by holding the handles on it. Do not move the inverter by holding
the terminals.
4.4.1 Manual Transport
24
To Next Page
Loading...
