4 Mechanical Mounting User Manual
step 4
Remove the lifting rings and reassemble the sealing screws released in Step 1.
CAUTION
Keep the inverter balanced throughout the hoisting process and avoid collisions with
walls or other objects.
Stop hoisting in the event of severe weather, such as heavy rain, thick fog, or strong wind.
The lifting rings and the sling are not within the delivery scope.
- - End
4.5 Installing Mounting-bracket
Inverter is installed on the wall and bracket by means of mounting bracket.
The expansion plug set shown below is recommended for the installation.
26
To Next Page
Loading...
