7 iSolarCloud App User Manual
7.4.2 Login Procedure
step 1 Open the App to enter the login page, tap Local Access at the bottom of the page to go to the
next page.
step 2
Establish the Bluetooth connection by either of the two following ways. If the LED indicator flashes
blue, the connection is successfully established. If the inverter is configured with optimizers, log
into iSolarCloud via WiNet-S2 or into the logger1000 Web to view and modify the parameters of
the optimizer.
•
Scan the QR code on the side of the inverter for Bluetooth connection.
•
Tap "Manual connection" and select "Others" at the bottom of the page, the Bluetooth search
page will automatically pop up, and select the inverter to be connected according to the SN on
the nameplate on the side of the inverter body.
76
To Next Page
Loading...
