24
Safety shoes Utility knife Anti-static wrist strap Marker
Level Hammer drill
(φ12)
Rubber mallet Phillips screwdriver
(M4, M5, M6)
Open-end wrench
(16 mm, 60 mm)
Socket wrench set
(M8)
Wire cutter Wire stripper
Hydraulic plier Heat gun Crimping tool
4–6mm
2
Connector wrench
- -
Multimeter
≥ 1100 Vdc
Vacuum cleaner
4.4 Moving the Inverter
Before installation, remove the inverter from the packing case and move it to the installation
site. Follow the instructions below as you move the inverter:
4 Mechanical Mounting User Manual
To Next Page
Loading...
Need help?
General