84
figure 7-12 System Parameters
* The image shown here is for reference only.
Boot/Shutdown
Tap Boot/Shutdown to send the boot/shutdown instruction to the inverter.
Date Setting/Time Setting
The correct system time is very important. Wrong system time will directly affect the data
logging and power generation value. The clock is in 24-hour format.
Software Version
Version information of the current firmware.
7.6.2 Operation Parameters
Running Time
Tap “Settings→Operation Parameters→Running Time” to enter the corresponding
interface.
figure 7-13 Running Time
PID Parameters
The PID function may not be applicable in some areas. Please consult SUN-
GROW for details.
Tap “Settings→Operation Parameters→PID Parameters” to enter the corresponding
interface.
7 iSolarCloud App User Manual
To Next Page
Loading...
Need help?
General