97
Parameter
Description
City* The city where the plant is located.
Postal Code
The postal code of the place where the plant is located.
Country/Region* The country (region) where the plant is located.
Time Zone*
The time zone of the place where the plant is located.
Module Model
The model of the PV module actually used in the plant.
Owner's Email Address* Enter the owner's email address.
Grid-connection Type* Set the grid-connection type for the plant.
Grid-connected Date
Shows the current date by default. You may tap
to
set the grid-connected date.
Plant Image Upload an image of the plant.
• Note: * indicates required fields.
• Upon opening “Create Plant”, detailed information about the plant location will
be acquired automatically.
- - End
7.7.2.2 Add Communication Device & Set up Network Connection
Background Information
Communication devices are used for network connection between the inverter and the serv-
er. To allow exchange with the server, users need to add a communication device to the
plant and complete network configuration accordingly. The communication device should
connect to the wireless home network, or any other network that is available. After the net-
work connection is established, the communication device will collect the inverter's operating
data and upload them to the server. Users can view all kinds of plant data on the iSolarCloud
App.
Requirements
• Make sure the mobile phone has connected to a home network.
User Manual 7 iSolarCloud App
To Next Page
Loading...
Need help?
General