85
figure 7-14 PID Parameters
table 7-8 PID Parameter Description
Parameter
Description
PID Recovery
Enable/Disable the PID night recovery function. Once enabled, it
works between 22:00 pm and 5:00 am by default.
Clear PID alarm
If ISO impedance abnormality or PID function exception is de-
tected during running of the PID function, the inverter reports a
PID abnormity and reminds the user to take corresponding meas-
ures. Clear the alarm report via this parameter once the problems
are handled.
PID Scheme
Apply negative or positive voltage.
AFCI Parameters
The AFCI function may not be applicable in some areas. Please consult SUN-
GROW for details.
Tap “Settings→Operation Parameters→AFCI Parameters” to enter the corresponding
screen, on which you can set "AFCI Parameters".
figure 7-15 AFCI Setting
Regular Parameters
Tap “Settings→Operation Parameters→Regular Parameters” to enter the corresponding
screen, on which you can set "Regular Parameters".
User Manual 7 iSolarCloud App
To Next Page
Loading...
Need help?
General