75
figure 7-3 Login
The Account is “user”， and the initial password is "pw1111" or "111111" which
should be changed for the consideration of account security.
To set inverter parameters related to grid protection and grid support, contact your
distributor to obtain the advanced account and corresponding password. If the
distributor is unable to provide the required information, contact SUNGROW.
Step 4 If the inverter is not initialized, you will enter the quick setting interface of initializing
protection parameters.
figure 7-4 Initialization Protection Parameter
The Country/Region must be set to the country where the inverter is installed.
Otherwise, the inverter may report errors.
User Manual 7 iSolarCloud App
To Next Page
Loading...
Need help?
General