100
Sewing setting
■■ SSeettttiinngg tthhee sseewwiinngg aarreeaa
① In menu, select “sewing area setting”, a
sub-level menu under “sewing setting”.
Set up the sewing area for editing
② As shown in sewing setting dialog, X is
set at 130mm and Y at 60 mm. The
sewing area set in the initial display is
aligned with these values.
③ Set X-length at 70mmm, and Y-length at
50mm and click “Ok”, then the sewing
edit area will change as shown in the
figure. The area will change while
sewing data remains the same.
The following figure shows Before and After setting the sewing edit area.
Before After
To Next Page
Loading...
