97
■■
Min-Max. Sewing Range
■■
Measurement (Point to Point)
① Sewing data should exist in the edit range.
② Select Min/Max Sewing Range on the upper
of the menu.
③ Min-Max Range Dialog is displayed. You can
easily find the max-min range of sewing data
through the range dialog.
Display the max-min range of sewing data in the edit range.
① Select “Measure”on the upper of the menu, or
“Measurement(Point to Point) ”on the
Measure tool bar. The selected button gets conc-
aved.
② Select the first sewing data joint to measure with
the mouse’s left button. The selected joint shows
in a dark circle as shown in the figure.
③ Continuously select the second joint. It also shows
in a dark circle as shown in the figure.
④ If the figure above is displayed, click the mouse’s
right button. The selected dark circle disappears,
and the measured value between two stitches is
displayed on the Stitch Length in the upper-right
of Information Tool Bar.
Measure the distance between two stitch points.
To Next Page
Loading...
