148
ROM DATA I/O
① Upon selection of “Pattern → BarTack”in the upper tool bar, the following dialog
box is displayed
② Pattern → BarTack is selected as the default value. Do not change it.
Display File Name : Box to input the name of pattern file which is converted
and saved as a BarTack file
: Button to create the Selection Dialog Box to select the pattern file to
be converted
With reference to, Pattern→ BarTack is provide in the upgrade
version only.
ROM DATA I/O has two items of ROM and Pattern/BarTack. ROM for the BarTack
sewing machine executes the external SSPWriter program connected with the SSP-
WE/2.5 program. To execute this function, SSP-Writer1 must be connected with the
computer print port, and the executive program must be installed in the computer.
How to install and use the SSPWriter program is in detail described in the following
configuration and installation of SSP Writer:
Pattern/BarTack provides the function to convert the pattern file into the binary file
(Bin file) so that it can be used in BarTack.
■■
Pattern/Bartack
■■
ROM DATA I/O
To Next Page
Loading...
