SunStar SSP-WE/3.5 - Editing by the Stitch Creating Order

71
This displays the order of stitch-by-stitch sewing data and provides stitch edit functions.
■■
Editing by the Stitch Creating Order
① If sewing data has been created as shown in
the figure, display the order of created sewing
point as shown in the figure.
② Select Move or Delete button for one stitch of
sewing data. The selected button gets concav-
ed as shown in the figure.
③ If it has been selected, select the correspond -
ing sewing data stitch. The data stitch is displ-
ayed in a red circle dot as follows:
This displays the magnifying screen.
The best sewing data creation method is to create configuration data
or sewing data, create and edit sewing data conforming to actual
design types, then designate various attributes of sewing data to make
the final design.
Creating Configuration Data Editing Configuration Data Creating Sewing Data
Editing Sewing Data and Changing its Attribute Save
→→ →
→