98
■■
Making 2-Step Stitch
①
Create sewing data of ZigZag or gen-
eral stitch type on editing screen. This
description gave ZigZag stitch as an
example. Next figure is general ZigZag
stitch prior to applying 2-Step stitch.
Also, If you select and
apply “2-Step Stitch”button from measure-
ment tool bar, you can see that one stitch is add-
ed between ZigZag stitch and stitch and so a
ZigZag stitch is created as shown in the following
figure.
②
If you select “Editing”on top of menu, you can
see “2-Step Stitch”in the bottommost.
Making 2-Step Stitch is the function to add one stitch between stitch and
stitch. It can apply to all existing Zigzag or general stitch.
Application procedure is as described below.
In such case as above, we applied 2-Step Stitch to ZigZag that has configuration
data. If you
mmoovvee sseeggmmeenntt ooff ccoonnffiigguurraattiioonn ddaattaa,, yyoouu ccaann ccrreeaattee ZZiiggZZaagg
aaggaaiinn aaccccoorrddiinngg ttoo tthhee cchhaannggeedd ccoonnffiigguurraattiioonn ddaattaa.. TThheerreeffoorree,, eexxiissttiinngg
aapppplliieedd 22--SStteepp ssttiittcchh bbeeccoommeess ttoo ddiissaappppeeaarr..
Please remember this. Otherwise, if it is point stitch without configuration data, it
cannot change as configuration data.
Reference
To Next Page
Loading...
