128
The above sample design that actually was sewn is a design offered as a
standard pattern.
■■SSaammppllee ddeessiiggnn ((BBaassiicc ppaatttteerrnnss ffoorr KKMM--22007700PP))
Basic pattern number
④ Leave the port in its COM-1 port status and click “Port Checking”to check
whether it is ready to communicate with 2070P. If the port is ready to send, a
“successfully connected”message will appear.
⑤ If everything is set, click “Zigzag file loading…”to read extended design file
(ROM.zig). If you press the button, you will see a box to open.
Select the zigzag file you wish to send and press “open”
⑥ Press “Data transmission”to send the selected zigzag extended design to
2070P. After sending the data, you will see in your operation box of 2070P
something similar to “Zigzag direct transmission method” If you have sent the
data successfully, you will see “successfully transmitted”.
To Next Page
Loading...
