102
■■SSttiittcchh ppooiinntt llaayyoouutt
① In menu, select “stitch point layout”, a
sub-level menu under “sewing setting”.
You may change the shape of sewing data created in the editing screen into
various shapes.
② After selecting, you will see “stitch point layout dialog”.
Stitch line size: Sets the thickness of the line between stitch point and point.
Stitch point color: Sets the color of stitch point.
Stitch line color: Set the color between stitch point and point.
Center line on/off: Sets on or off the centerline in the edit screen
Jump stitch on/off: Sets on or off the jump data in the edit screen
Initial setting value: Initializes all the set values into default values
OK: Applies the set values
Cancel: Exits from “stitch point layout setting dialog”
Stitch point size:
The size of stitch point can be set. The
smaller the number, the smaller the
point size gets. This function can be
useful for editing complicated data.
However, there will be no point if the
size is set at 0.
Stitch point type:
Two different types of stitch points can
be set. One is cross point, which is
stored as a default value. The other is
circular point.
To Next Page
Loading...
