140
Pattern data direct transmission
<< MAIN Menu >>
7. Download Ptrn
Save Pattern Num
Save Num = 000
Save Parrern Num
Save Num = 001
Memory(0)/FDD(1)
To Exit(ESC)...
<< MAIN Menu >>
7. Download Ptrn
<< MAIN Menu >>
5. Pattern List
6. EMB Call
7. Download Ptrn
① Press MODE in pattern operation box and
select 7. Download Ptrn under main menu.
② Save Pattern Num will appear. Key in “001”
using the number key in the operation box to
save the name of the pattern.
③ Press Enter.
Select the final memory you wish to store.
1) “0”: Store received design in the main
memory of the CPU.
2) “1”: Save received design in floppy disc.
After you select the number you wish to store,
you will have the download setting mode on
with beeping sounds.
④ After transmission is ready using pattern OP,
use SSP to send created designs. Press
Pattern data direct transmission of SSP.
⑤ If transmission is successful, OP box screen
will return to the initial screen with beeping
sounds.
⑥ On your PC, a “successfully transmitted”
message will appear.
⑦ To check the status of the transmitted design
to the pattern, go to 5. Patter List. Call in
design and start sewing.
To Next Page
Loading...
