141
Go to Total Jump and Stitch in the
upper menu to see the total number
of stitches for transmission.
Note!!
For the pattern series, the number of stitches that can be transmitted to the
machine with design data input is limited.
SPS/A/B- Series: 10,000 stitches
Be sure to keep in mind the maximum number of stitches for transmission by
machine type when sending designs.
The maximum number of stitches as described above includes both jump and
sewing stitches.
The set-up values of baud rate by machine type are as follows.
1. KM-2070P: 57600 (Default value for SSP program)
2. Bartack Series: 38400
3. Pattern Series: 115200
To Next Page
Loading...
