42
The following describes how to create sewing data.
How to input sewing data is still easier than that of configuration data ment-
ioned above. That is why it is created with the previously crated configura-
tion data. How to create data is generally divided into two methods: First,
Point Stitching Method inputted by users, and second how to input with the
previously created configuration data.
User can set a jump code at his/her discretion and
use it for sewing work.
Follow the steps below to use the function.
User can set a jump code at his/her discretion and
use it for sewing work.
Follow the steps below to use the function.
① Select the jump stitch button on the upper left
sewing toolbar. When selected, it remains
pressed.
② Place the mouse button at the desired location
and press the mouse button to generate a jump
code. Whenever the left mouse button is
pressed, the jump structure data is drawn. To
cancel in the middle of drawing, press “Esc”.
③ After finishing Step 2, press the “right mouse
button” to generate a jump stitch. When the
button is pressed, the jump generation window
appears. When “okay” is pressed, jump stitch
data is generated. When “cancel” is pressed,
jump stitch data is not generated, but jump
structure data only remains.
To generate jump stitches based on the existing jump structure data,
select the jump structure data, enable the function, and press the
jump stitch button. Press the right mouse button on the screen, and
the jump stitch generation window appears.
Press “okay" to generate jump data.
■■
Creating Sewing Data
··
User's jump input
To Next Page
Loading...
