43
In the middle of work, the function enables the return to the previous status. It can be
used by pressing the [UNDO] button on the top or simultaneously pressing “Ctrl+Z”
keys on the keyboard. The UNDO function can be used 20 times
Follow the steps below to use the function.
① Generate a design within the sewing scope as
in the figure by using circle's zigzag stitching
method.
② Delete the location data from the stitch data.
Use the stitch point deletion function to delete.
··
Undo function
In the middle of work, the function enables return again returned execution by undo
function to the next status. It can be used by pressing the [REDO] button on the top
or simultaneously press “Ctrl+Y”keys on the keyboard. The Redo function can be
used 20 times.
Follow the Steps below to use the function.
··
Redo function
③ To return to the original status after making
deletion, press the UNDO button at the top
menu or press “Ctrl+Z” keys at the same time to
undo the change.
To Next Page
Loading...
