13
① You can find the Key-Lock Driver in a “SUN-
STAR SSP”directory.
② Double click a Sentinel 7.1.0.exe file in the
folder to install the Key-Lock Driver.
③ After installing the Key-Lock Driver, connect
the Key-Lock with the Print Port on the back
of PC.
■■
Installing the Key-Lock Driver
■ Windows XP might not recognize the key lock for printer port. This
may happen when Miscrosoft's Service Pack 2 is installed and the
firewall is in operation
① Insert the install CD and click the latest key lock driver folder. Double-click “Sentinel
7.1.0.exe” for installation.
① If the key lock drive for print port has already been installed, this should be uninstalled
before installing the above file.
② Reboot the PC.
② If a user has installed Service Pack 2 of Microsoft, and the firewall is in operation, the
firewall should be turned off.
③ After following the above procedures, execute SSP and then the program will be
executed without any problems.
③ If the key lock is not still recognized, go to “My Computer” and choose “Hardware” in the
“System Information Display”. Then click the “Device Admin” to check if LPT port is
registered.
③ If LPT port is not registered, the key lock can not be recognized.
※ “Sentinel 7.1.0.exe” driver supports both the key lock for print port and the key lock for
USB.
To Next Page
Loading...
