26
Provide the input functions of configuration data to create sewing data tools. This is
composed of functions to create various patterns such as Normal Line, Arc, Polygon,
Circle, Spline, and Closed Spline. And this provides Input, Delete, and Move
functions to edit one point of the created configuration data, Divide function to divide
the configuration data, Offset function, Data Delete function, and overall Create and
Edit functions, etc.
··
Data Tool Bar
Sub Tool Bar
Following Edit Tool, Data Tool, Sewing Tool, Sewing Edit Tool, Sewing
Change Tool, and Machine Tool Bar provide the actual functions relating
to punching. All works relating to punching are mainly executed in these
tool bars.
Upon inputting data in the current sewing range, provide various functions to facilitate
users. Provide the Zoom In/Out function to enlarge or reduce the current sewing
range, and move the enlarged range freely using Hand Tool. And provide the Ruler
function (Not be currently provided. But this will be applied in the Upgrade Version) to
display a ruler to the left and upper of the screen that users can find the size easily,
and the Grid Line function for a user to easily input data by displaying the sewing
range with the grid lines. In addition, it also provides an ‘image punching’function
that allows to make a punch on the back of the image by bringing BMP file to a
sewing area.
··
Edit Tool Bar
Hand Tool (F3)
Zoom In (F4)
Zoom Out (F5)
Zoom All
Ruler Bar
Grid Line (F2)
Using Zoom In to freely move the enlarged
sewing range.
Enlarge the sewing range.
Reduce the sewing range.
Display the sewing range conforming to
the sewing size.
Display a ruler to the left and upper of the
sewing range (Not be currently provided.)
Display Grid Lines on the sewing range.
Image Punching
It brings the BMP file as a reference to
the center of the sewing area.
To Next Page
Loading...
