87
Divide the selected sewing data.
··
Sewing Element Division
① Select Sewing Element Division.
② Select sewing data joints to divide. The joints
displays in blue.
③ Click the mouse’s right button.
④ Sewing Stitch Division Dialog is displayed.
⑤ Click “OK”, then you can find that the selected
sewing data has been divided.
■■
Sewing Change Tool
Change the sewing data creation direction reversely.
··
Sewing Direnction Change
① Select Sewing Direction Change.
② Select sewing data to change.
③ Click the mouse’s right button to display
Change Sewing Direction Dialog.
To Next Page
Loading...
