119
Saving KM-2070P pattern data
① To save your current pattern designs in the edit area, click save.
■■ FFiillee ssaavvee
Saves all the data inputted in the edit area to the present point.
The KM-2070P file save function stores general pattern data, and additionally
stores ROM.zig and
*
.txt data.
··
Information
A saved file by SSP 3.5 is for only E-Series Machine. Only E-Series Machine can
control sewing by 0.05mm, and the other series machine can not. Therefore this file
can not apply to A/B/C/D-Series. However a file is made by SSP 3.0 or before version
of SSP can be applied for E-Series machine.
To Next Page
Loading...
