38
New Pattern Creation
A new edit range should be selected prior to creating configuration data
or sewing data. There are two ways.
First, the new edit range can be created by clicking “New Data”in Start Dialog Box creat-
ed upon execution of the program
Upon clicking all of two buttons, the mechanical
dialog box displays as shown in the left screen. It
has functions as follows:
Machine Type : Select machine type to work.
Machine Model : Set up machine model.
Sewing Size : After the machine model is selected,
edit range- sewing range is displayed.
Second, it can be created by clicking “New ”in the menu bar.
Upon clicking “OK”, the edit range is changed into the work range as the following screen.
To Next Page
Loading...
