33
Configuration Data
As mentioned above, configuration data is based on creating sewing
data. Its kind is as follows:
Normal Line
Polygon
Arc
Circle
Spline
Closed Spline
If you select any function button of configuration data functions of Sub Tool Bar
, click the left button of the mouse and input the configuration data on
the sewing range, the configuration data indicates with a blue dotted line. If you create
another configuration data, the previously created configuration data gets changed in
gray, and the currently creating configuration data gets changed in blue again. As
shown in the above [Data Creation Picture], the line in the blue part indicates the
currently selected configuration data with a Spline attribute.
The configuration data is always shaped with a blue circle.
To Next Page
Loading...
