108
④ Now, press “OK”button in “Embroidery File Call Dialogue”box for actual conv-
ersion. Dialogue box shall disappear and there is no change. “000”file actually
changed from embroidery file into pattern file is created into the folder of Original
Embroidery Design.
⑤ Call the changed pattern file “000”by selecting “Open”button on top of menu.
Press “Open button”.
You can see that the changed embroidery file appears as pattern file on screen as
shown in the figure below.
References for embroidery design change is as described below.
First, concept of embroidery and pattern is somewhat different and so you might
have problem if you change existing embroidery file into pattern file and sew as
it is. Such problem is because design is that for embroidery itself and so
sewing may not be done properly in the pattern due to thickness of thread or
conditions of needle and sewing cloth, stitch width of design, etc. Also, due to
property of embroidery code, jump function can input instead of general stitch in
the optional middle or one stitch can be added before the location that stitch is
started after jump in case of complex embroidery design conversion, in particular,
in case of Satin. Please note such points and then convert embroidery design
into pattern design and sew.
Reference
To Next Page
Loading...
